Posted: Sun Feb 24, 2013 6:20 pm Post subject: Installing Speed Daddy Headers
I bought some speed daddy headers for my L67 Impala. I am having some issues installing them and was wondering if anyone had some advice. I have the rear manifold in and bolted down, but i can't get the front one to line up with the crossover pipe. If attempted to screw in the front then i can't get it to fit in the cross over, if i put it in the cross over and then attempt to bolt the manifold in, i can't get even close lining up the screws. is it possible that the crossover isn't bent to the right angles? or am i doing something wrong?
im just trying to remember from doing my monte. Put the rear in first , then attach the crossover then go to bolt up the front header and slip the crossover into it . Thats how i did it . You might have to turn the crossover some or rotate it .
well thanks to my dad making the 4 hr trip from cortland to dayton to deliver the pipe bender i was able to install the headers today. Turns out that the cross over pipe was not properly angled. pics soon to come.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum